Top 7 Best 3d printer controller board For 2022
1. BIGTREETECH SKR Pro v1.2 32-bit Motherboard high-Frequency 3D Printer Control Board, Support TMC5160, TMC2208, TMC2130, TFT28, TFT32, TFT35, 12864LCD ect.
- The main control uses the ARM-level Cortex-M4 series with a 32-bit dominant frequency of 168 MHz STM32F407ZGT6 chip, performance is greatly improved.
- Equipped with highly modular open source firmware Marlin2.0, it is convenient for users to DIY and further-development, to avoid the worry of not being able to master the core code.
- Motor driver support :TMC5160,TMC2208,TMC2130,ST820,LV8729, DRV8825,A4988, etc.Display screen support: BIGTREETECH- 2.8 inch TFT,BIGTREETECH-3.5 inch TFT, LCD2004,LCD12864.
- Support Serial WIFI Online Printing. 6 motor drives, 3 extruders, 3 CNC fans. Reserve extended ports of BL Touch, PWM, ADC, UART, I2C and SPI;Support power-off continuous printing, material cut detection, shutdown and other functions;Support for dual Z axis printers (series dual Z.
2. KEYESTUDIO 3D Printer Controller Board RAMPS 1.4 REPRAP Mendel PRUSA with Stepper Jumper Screw Terminal Block for Arduino Mega and ramps 1.4 Projects
- It has total 5 slots for stepper motor drive module to drive 5-channel stepper motors. The slots are compatible with all kinds of drive modules like A4988, DEV8825.
- There are 3 jumper caps under each slot, which can be used to control the working subdivision of drive modules.
- For example, if connect the A4988 and plug three jumpers, the subdivision port MS1、MS2 and MS3 of A4988 module are at active HIGH, so the A4988 module is in 16-subdivision working mode.
- But if unplug the three jumpers, MS1、MS2 and MS3 of A4988 module are at active LOW, so the A4988 module is in full-step working mode.
3. KAFRI RGB Headphone Stand with USB C Charger Desk Gaming Headset Holder Hanger Rack with 3 USB Charging Port and 2 Outlet – Suitable for Gamer Desktop Table Game Earphone Accessories Boyfriend Gifts
- 【RGB LED lights】KAFRI RBG Headphone Stand can display 9 lighting effects modes, up to 16.8 million colors to creat an amazing gaming atmosphere at your preference. that can be selected merely by pressing a Touch switch. Great gifts for Son, Boy, Man, Husband and Boyfriend.
- 【3 Port Smart USB Charger】USB-C port allow you to charge your iphone 12 and extra 2 USB-A charge your other smartphone, ipad, tablet or other smart device without plug in wall, handy, conveniently and organized. It can detects your device automatically to deliver its fastest possible charge speed up to 2.4 amps per port or 4 amps overall.
- 【2 Safe Outlet Power Socket】 Outlets compatible with laptops, printers, bluetooth speakers, Lamp, Xbox 360 One, PS4,PS VR,Oculus,Vive and other devices with this outlets power strip. The Total Output of this AC Outlet is 1250W.
- 【Safe Guard】Fire-resistant and hardened plastic outer shell for durability, no risk of wood flammable and metal leakage,build-in premium circuitry and microchip, ensure device safety.Multi-protection system shields everything from overload, short-circuits, over-current and other charging issues.
- 【What You Get】KAFRI Headphone dock / Power Strip / 1-Port USB-C Charger, 2 USB-A Chargers, 5ft / 1.5m detachable Power Cord , If there is any quality issue for this headphone rack or you are not happy with your purchase, please do not hesitate to contact us.
4. 3D Printer CNC Controller Kit with for ArduinoIDE, Longruner GRBL CNC Shield Board+RAMPS 1.4 Mechanical Switch Endstop DRV8825 A4988 Stepper Motor Driver Nema 17 Stepper Motor LKB02
- ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for ArduinoIDE, GRBL 0.9.
- ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great assortment set for starters and professionals.
- ★ Premium Quality ★ Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of application.
- ★ DRV8825 Stepper Motor Driver with Heat Sinks ★ High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum), compatible with for ArduinoIDE software and hardware.
- ★ Good after-sales service. We’ll respond within 24 hours for any questions.
5. BIGTREETECH SKR Mini E3 V2.0 Control Board 32Bit New Upgrade for Creality Ender 3, with TFT35 E3 V3.0 Graphic Smart Display Controller Board 3D Printer Parts
- 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz; Upgrade the firmware by SD card. It is easy and convenient to operate.
- 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip;Integrate UART mode of TMC2209 to simplify debugging of motherboard and driver.Reserve expansion ports for TMC2209 pins to facilitate users to use DIAG instead of Endstop.
- 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.
- 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.)
6. Flashforge Creator Pro Motherboard 3D Printer Accessories Controller Board for 3D Printer
7. HiLetgo 3D Printer Reprap Smart Controller 12864 LCD Display with Smart Controller Board for 3D Printer RAMPS 1.4 Reprap Mendel Prusa for Arduino 128×64 LCD Blue Color
8. 3D Printer MKS Gen-L V1.0 Controller Board, MKS Integrated Mainboard Motherboard Compatible with Ramps1.4, Supports TMC2100 A4988 8825 Driver, LCD2004 LCD12864 TFT28 TFT32
- 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Reserve external driver signal, available to connect external high-current driver to drive the 57 and 86 stepper motors. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like.
- Use specific power chip, support 12V-24V power input, and resolve the problems of chip heating and power shortage. Use high-quality MOSFET, better cooling effect and more stable.
- Use CH340 serial port chip, more easily install the drive than 16U2. Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Support 24V input, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats.
- Run Marlin firmware, the configuration is completely same as Ramps 1.4, and available to directly replace the Ramps 1.4. Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32.
- Plug the stepper drivers according to the different color terminals which decreases the probability of reverse and prevents the controller board damage.
9. OSOYOO 3D Printer Kit with RAMPS 1.4 Controller + Mega 2560 Board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display Controller with Adapter for Arduino RepRap
- 3D Printer Controller RAMPS 1.4 interfaces an Arduino Mega2560 board. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion
- With LCD 12864, you can easy connect it to your Ramps board using the “smart adapter” included. After connecting this panel to your Ramps you don’t need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.
- It is designed to fit the entire electronics needed for a RepRap in one small package for low cost
- We are professional factory on making all electronics components based on Arduino and Raspberry Pi. And we also have processional engineer team to offer you tutorials which you can start from beginning. all documents (including code)
10. BIGTREETECH TFT35 V3.0 Graphic Smart Display Controller Board for 3D Printer Ramps 1.4 RepRap 3D Printer Can Select Two Work Modes
- 1.Upgrade the firmware by SD card. It is easy and convenient to operate.This display board has higher compatibility. Users can select two work modes,they are UART serial port screen mode and 12864 screen mode.
- 2.Serial port screen mode supports two printing modes: SD card and U disk.
- 3.Reserve WIFI port, and WIFI function is realized by external WIFI module;
- 4.Reserve the extension port of filament breaking detection (FIL-DET);Reserve the extension port of automatic shutdown after printing (PS-ON);
- 5.2 sets of UART serial port extension ports are reserved for DIY use.
