Top 7 Best clamp multimeter For 2022
1. Fluke 325 Clamp Multimeter AC-DC TRMS
- Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohms
- True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
- Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit
- Audible continuity sensor confirms that the circuit conducts electricity
- Meets IEC safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
- 400 A AC and DC current measurement
- Resistance measurement up to 40
- Ac voltage make for the most accurate measurements on non-linear signals
- Temperature and capacitance measurement
- Frequency measurement
2. Fluke 116/323 HVAC Multimeter and Clamp Meter Combo Kit
- The fluke 116 digital multimeter features a built-in thermometer for HVAC applications
- Fluke 116 digital multimeter features micro amps to test flame sensors
- Fluke 116 digital multimeter low input impedance helps prevent false readings due to ghost voltage
- Fluke 323 true RMS clamp meter measures 400 A AC current and 600 VAC and DC voltage
- Fluke 323 true rms clamp meter features true RMS AC voltage and current for accurate measurements on non linear signals
3. Fluke 1587/I400 FC 2-In-1 Insulation Multimeter With Clamp
- Pl/DAR measurements with TrendIt graphs
- Memory storage through Fluke Connect Measurements app. CAT III 1000 V / CAT IV 600 V overvoltage rating for added user protection
- Temperature Compensation through Fluke Connect Measurements app
- Fluke i400 AC Current Clamp Use with your Fluke 1587 FC to measure 1A AC to 400 A AC
- 1 mA/Amp output guarantees easy reading
4. KAIWEETS Digital Clamp Meter T-RMS 6000 Counts, Multimeter Voltage Tester Auto-ranging, Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle (AC/DC Current)
- True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
- LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.
- NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.
- Multi-function: Two-color backlit LCD Display – When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity.
- Safety Service: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product service provided. 7/24 Customer Service.
5. Klein Tools CL390 Digital Clamp Meter, Reverse Contrast Display, Auto Ranging 400A AC/DC, AC/DC Voltage,TRMS, DC Microamps, Temp, NCVT, More
- Test lead holder on side of clamp and optional magnetic hanger for meter (Cat. Nos. 69445 or 69417) for hands free operation
- Non-contact voltage tester integrated into the clamp jaw
- High-visibility reverse contrast LCD display for improved view ability in all ambient lighting conditions
- Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy
- Measures AC/DC current and NCVT via clamp and AC/DC voltage, resistance, frequency, DC microamps, capacitance, duty cycle, diode test, and continuity via test-leads, and temperature with thermocouple
- Measures temperature with a K-Type thermocouple probe
- Max/Min, Rel/Zero and Data Hold capability
6. Fluke 117/323 Kit Multimeter and Clamp Meter Electricians Combo Kit
- The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps
- The 117 multimeter features true RMS for accurate measurements on non-linear loads
- The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage
- The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals
- The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage
7. Fluke 323 True-RMS Clamp Meter
- Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600 v, and resistance to 4 kilo ohms. Does not measure DC current
- The true RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
- Jaw opening measures current in a conductor up to 30 millimeter without touching or interrupting the circuit. Resistance accuracy: 1.0% ± 5 digits
- Audible continuity sensor confirms that the circuit conducts electricity
- Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
8. Etekcity Digital Clamp Meter Multimeter AC Current and AC/DC Voltage Tester with Amp, Volt, Ohm, Continuity, Diode and Resistance Test, Auto-Ranging, Red, MSR-C600
- Accurately Measures: AC/DC voltage, only for AC current (not for DC current), resistance, and also provides diode and continuity tests
- Jaw Opening: the Clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
- Additional Features: data hold, max reading, and an easy-to-read large LCD
- Easily Carrying: comes with a handy carrying pouch, perfect for use while you’re on the go
- Sleep Mode: automatically enters sleep mode after 15 minutes of inactivity for energy conservation
9. FLIR DM285-FLEX-KIT Imaging Multimeter Kit & Clamp
- Thermal imaging allows you to quickly scan for overheating system components, then use the DMM test functions to troubleshoot and diagnose the fault
- Wirelessly connect to the FLIR InSITE professional workflow management tool to streamline inspections and simplify data collection, sharing, and reporting
- Onboard data storage for both electrical parameter data and thermal images
- Function DMM including VFD mode, true RMS, LoZ, NCV, a built-in work light, and a laser pointer
- Measures voltage, current, frequency, resistance, continuity, diode, capacitance, and temperature
10. Klein Tools CL220 Digital Clamp Meter, Auto-Ranging 400 Amp AC, AC/DC Voltage, TRMS, Resistance, Continuity, NCVT Detection, and Temp
- Measures AC current and NCVT via clamp and AC/DC voltage, resistance, and continuity via test-leads, and temperature with thermocouple
- Non-contact voltage tester integrated into the clamp jaw
- Backlit LCD for ease of viewing in low light
- Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy
- Test lead holder on side of clamp and optional magnetic hanger for meter (Cat. Nos. 69445 or 69417) for hands free operation
- Measures temperature with a K-Type thermocouple probe
- Auto-Range, Hold, Data Hold, and Max value
