Top 7 Best android spectrum analyzer In 2022
1. Upgraded TinySA Spectrum Analyzer,Karagas Spectrum Analyzer Handheld,MF/HF/VHF Input for 0.1MHZ-350MHZ and UHF Input for 240MHZ-960MHZ,Portable Frequency Analyzer with 2.8 Inch Touch Screen V0.3.1
-
◙【Built-in 2-in-1 Calibration Signal Generator】This TinySA Spectrum Analyzer built-in calibration signal generator that is used for automatic self test and low input calibration.When not doing spectrum analyzer,it can be used as signal generator with two frequency outputs,MF/HF/VHF sinus output for 0.1MHZ-350MHz and UHF square wave output for 240MHz-960MHz.
-
◙【 Frequency Range】The 2.8-inch color touch screen displays 290 scanning points,covering the entire range of low-frequency or high-frequency ranging frequencies.0.1 MHz -350 MHz high quality IF/HF/VHF input,240 MHz -960 MHz low quality UHF input.A switchable resolution band-pass filter suitable for the range from 2.6 kHz to 640 kHz.
-
◙【PC Control】This spectrum analyzer can be connected to PC through USB,and realizes the serial over USB (CDC) protocol,which can call a large number of commands.The Windows driver will be automatically installed after connecting to the Windows computer.The Linux driver is built into the kernel.
-
◙【Portable Spectrum Analyzer & ESD Protection Function】The latest version 3.1, new ESD protection function, installed diodes,so that it has more sensitive response performance,efficient anti-static level,better quality,longer service life.Built-in 650mA battery,rechargeable and portable use for at least 2 hours.
-
◙【Good Service】Package List:1x Tiny Spectrum Analyzer,1xBox,2 x 20cm RF Cable,1 x USB-C Cable,1 x SMA Telescopic Antenna,1 x SMA Female to Female Connector,1x Touchscreen Pen,1xTouch screen paddles and lanyard.If you have any questions can contact us, we will sincerely service to your satisfaction,we can provide a full refund service until you are satisfied.
2. OSCIUM WiPry 2500x: Wi-Fi Spectrum Analyzer, 2.4 & 5 GHz, Universal Platform Support (Including iOS, Android, PC, Mac), Portable, Advanced Reporting, No Software Subscription
- 2.4 GHz and 5 GHz Spectrum Analyzer views all interference including ZigBee, Bluetooth, Baby Monitors, etc
- Android, iOS, Mac, PC Supported
- Scan and Troubleshoot Wi-Fi
- SSID’s and RSSI
- 802.11 and ZigBee Channel Guides
3. Dayton Audio iMM-6 Calibrated Measurement Microphone for iPhone, iPad Tablet and Android,Black
- Precision condenser microphone for critical measurement
- For use with Apple iPad, iPhone, iPod Touch via 3.5mm TRRS headset jack
- Compatible with Android and Windows Phone devices with TRRS jack
- Headphone/Line Out pass-through jack for test signals or listening
- Kickstand feature elevates and angles device and microphone capsule
4. Portable TinySA Spectrum Analyzer,SEESII Upgraded V0.3.1 Handheld Tiny Frequency Analyzer 100kHz to 960MHz MF/HF/VHF UHF Input,Signal Generator with 2.8 inch Touch Screen with ESD Protect Function
- 【Frequency Range 】Tiny Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency rangefrequency range. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer.
- 【Built-in Calibration Signal Generator】When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration.
- 【Tiny Spectrum analyzers & ESD Function】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use.The performance of the 2021 latest version 3.1 will be more stable and sensitive, with a new ESD protrcted function enable the product to have a higher antistatic level and a longer service life.
- 【PC Control】Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer.The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel.
- 【Package List】1x Tiny Spectrum Analyzer; 2 x 20cm RF Cable;1 x USB Cable;1 x SMA Female to Female Connector;1x Touchscreen Pen;1 x SMA Telescopic Antenna.It’s very useful as an antenna analyzer for your ham station, easy to set without fancy calibration.The firmware of the tinySA can be updated by the user. New versions of the firmware needed please contact seller for download link.
5. Portable tinySA Spectrum Analyzer – AURSINC Hand Held Frequency Analyzer 2021 Upgraded V0.3.1 | 100kHz to 960MHz MF/HF/VHF UHF Input | ESD Protected Function & 2.8 inch Touchscreen | Signal Generator
- [2021 Upgraded Version: ESD Protection Diodes] Tinysa with latest firmware V0.3.1, the displayed version info is “ESD protected” meaning the diodes are installed which will be more stable and sensitive with higher antistatic level and longer service life. Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz
- [Frequency Range] Spectrum analyzers like the tinySA use a resolution filter that is used to isolate the input power in a small frequency range. This resolution filter is swept across the desired frequency range. The fastest scanning speed occurs with an RBW or 300kHz or wider and is about 2 scans per second. But with increase of the frequency span and decrease of the RBW the scanning speed decreases quickly. A scan from 0MHz to 350MHz with an RBW of 10kHz takes about 2 minutes.
- [2 in 1 Device] When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer. Color display showing 290 scan points covering up to the full low or high frequency range
- [4 Input/Output Spec Modes] The input/output specification of the tinySA is split over the 4 modes: Low input mode, High input mode, Low output mode, High output mode. The firmware of the tinySA can be updated by the user. New versions of the firmware needed please contact seller for download link
- [PC Control] The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel. Two softwares to control the tinySA are available. Both are able to capture the screen of the tinySA
6. Sound Spectrum Analyzer PRO
- Real time analysis (RTA) of SPL (noise) and frequency spectrum
- Channel selection and comparison
- Accurate calibration and Input/Output selection (INT, AUX, BT)
- Signal (tone) generator
- No advertisement
7. FrequenSee HD – Spectrum Analyzer
- 256 high-quality frequency bands [20Hz to 22kHz]
- Logarithmic frequency scale to match human perception
- Low latency for high responsiveness
- High frame rate to see smooth frequency and amplitude movements
- Low battery drain due to high performance native code
- Fast graphics using OpenGL ES 2.0
- FFT window size 4096 @ 60 frames per second
8. Upgraded NanoVNA-F V2 Vector Network Analyzer 50kHz-3000MHz HF VHF UHF VNA Antenna Analyzer 4.3 inch with 5000mAh,Measuring S-Parameter Voltage SWR, Phase, delay, Smith Chart
- 【4.3 inch Large Touch screen and powerful function】Handheld Vector Network Analyzer using 4.3-inch IPS TFT LCD screen, with a larger view angle and can be seen clearly in strong outdoor light.which can measure S-parameter, voltage standing wave ratio SWR, phase map, group delay, Smith chart and so on.
- 【Higher Capacity Battery,and Longer Standby time】 Upgraded the large capacity 5000mAh / 3.7V lithium battery, longer standby time, and extended USB interface. Typically, it can be used as a mobile power source to charge Android or Apple phones when not in use. The IC is charged by high current 2A, and the charging time is shorter.
- 【Upgraded Aluminium Housing 】 Standard aluminium shell to protect SMA head and reduce the interference of external electromagnetic wave to instrument.
- 【Measurement Range】 The NanoVNA-F measurement range is 50k-3GHz. You can go to the official website to update and expand the frequency to 10Khz-1.5Ghz.The harmonic expansion of the output signal of the clock chip SI5351 is used to measure the frequency to 1000MHz. At 600M-1GHz, the dynamic range of S11 is 40dB (the standing wave ratio is less than 1.02).
- 【Compact and Powerful】: Upgrade the user program by virtual U disk.Switch to a power switch with a greater sense of operation and a better sense of operation.Support Chinese and English menu switching.
9. Spectrum Analyser
- Select FFT size & frequency range
- Autoscaling graph or pinch/pan to adjust
- linear & logarithmic scales
- Averaging, Min and Max traces
- Save trace to file
10. Sound Spectrum Analyzer
- Real time analysis (RTA) of SPL (noise) and frequency spectrum
- Channel selection and comparison
- Accurate calibration and Input/Output selection (INT, AUX, BT)
- Signal (tone) generator
