Top 7 Best brazing rod for steel For 2022
1. Alumaloy 20 Rods – USA Made, As Seen on TV, 1/8″ x 18″ Simple Welding Rods, Aluminum Brazing/Welding Rods, Aluminum Repair
- REPAIRS: With rods twice as long as the competition, Alumaloy repairs or fabricates virtually anything made of aluminum, pot metal, or galvanized steel. Use something as simple as a propane torch on up. No Flux needed! You can repair boats, props, storm doors, gutters, antiques, tools, condensers, molds, rims, air conditioning lines, refrigeration coils, bell housing, pontoons, transmission cases, and so much more.
- EASY TO USE: Alumaloy is as EASY as 1-2-3. Simply clean the base metal, heat the base metal, NOT THE Alumaloy ROD, repair your way into hundreds of dollars of savings. Please refer to instructional video.
- NO WORRYING: Alumaloy melts at 728 degrees Fahrenheit giving you the ability to repair the thinnest to the thickest metals without worrying about war-page or distortion. Alumaloy even repairs pot metal; one of the most difficult non ferrous metals in the world to repair!
- PERMANENT: Alumaloy is specially formulated to make strong permanent repairs that can last a lifetime. Specs include: Tensile Strength lbs/ sq.in 39,000, Compression Str.lb/sq.in 60,000, shelf life is indefinite. Alumaloy is a welcome addition to any tool box and 100% guaranteed to work for you. Each rod is approximately 1/8″ x 18″ long.
- MADE IN THE USA: Alumaloy is an environmentally friendly product. Giving you the ability to repair more and throw out less. Saving money and the planet at the same time. Unlike other specialty repair rods, Alumaloy contains no lead, no tin and no cadmium. Alumaloy is proudly made in the United States of America!
2. RBCuZn-C – LFB Bare Bronze Brazing Rod – 36″ x 1/8″ (1 Lb)
- LFB (bare low fuming bronze) is a general purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as carbon steel, copper alloys, cast iron, malleable iron, stainless steel and some nickel alloys. Mechanical and physical characteristics include ductility, machineability, high strength, free flowing with good tinning action and a low melting point (1630°F)
- A “must have” filler metal for every machine shop, LFB is excellent for building up wearing surfaces or large areas where successive layers must be added; galvanized parts can be brazed without damaging the zinc coating. Precise balance of copper and zinc along with alloying elements of tin, iron, manganese and silicon produces weld deposits that can be easily machined but work harden once put into service; high silicon level promotes low fuming
- ***READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***
- Available in different sizes: 0.045″, 1/6″, 3/32″, 1/8″, 5/32″, 3/16″ and 1/4″
- Available in different package weights: 1 Lb, 2 Lb, 5 Lb and 10 Lb
3. Forney 48300 Bare Brass Gas Brazing Rod, 3/32-Inch-by-18-Inch, 10-Rods
- Easy flow brazing rod makes it simple to braze aluminum and zinc based metals with an oxygen acetylene or propane torch set up
- Great for repairs on irrigation pipes, carburetor bowls, aluminum boats, camper covers, lawn mower housings and casings
- Balanced zinc and copper alloy
- Flux is required
- Melting point is 1620 degrees Fahrenheit
4. Hot Max 24003 1/8-Inch by 36-Inch Mild Steel Brazing Rod, 1#
- General purpose copper coated mild steel brazing rod for all low carbon steels
- AWS A52 CLASS R47
- Diameter 1/8-Inch
- Comes with a variety of tips
- Length: 36-Inch
5. Hot Max 24000 Brazing Flux Powder, 8-Ounce
- For all types of steel, malleable and cast iron, galvanized metals, brass, and bronze
- This flux is used for flame brazing with either an oxy-acetylene or electric carbon arc torch
- Active Temperature Range: 1400 to 2200 F (760 to 1205 C)
- Meets AWS A5.31-91 Type FB3J Standards as well as MIL-F-16136B, Types A and B Standards
- Brazing Flux Powder comes in 8-Ounce container, Made in the USA
6. Blue Demon BDTP-125-01T Triple Play Low Temp Aluminum-Zinc Brazing Rod 1/8″ x 18″ 1 Lb Tube,
- One rod, 3 applications. Simple to use with only a propane torch.
- Approximately 22 sticks per tube
- Stronger than aluminum, harder than mild steel, excellent corrosion resistance
- No flux required. Welds zinc base metals, Brazed aluminum
7. Bernzomatic NS3 Nickel-Silver Flux Coated Brazing/Welding Rods, 2-Piece
- 2 pack, nickel silver brazing rod, 85,000 psi tensile strength, 1680 degree to 1750 degree working temperature
- Adds Extra shine to your product
- Manufactured in United States
- Nickel-silver flux coated brazing/welding rods perfect for repairing bicycles, metal furniture, railings, and radiators
- Contains 12-Inch rods
- Tensile strength: 85,000 psi
- Working temp: 1,680 degrees farenheit
- Used in joining carbon and alloy steels as well as non-ferrous materials
8. Bernzomatic WB5 Bronze Flux Coated Brazing/Welding Rod, 4Piece
- Bronze flux coated brazing/welding rods ideal for everyday repairing of steels, cast iron
- Contains 12-inch rods
- Tensile strength: 60, 000 PSI
- Working temp: 1, 620-degree Fahrenheit
9. US Forge Welding Gas Welding Rods Flux Coated Low Fuming Bronze Brazing Rod 1/8-Inch by 18-Inch .8-Pound #02232
- For general purpose brazing rod for repair of most ferrous and or non-ferrous metals
- For use with oxy-acetylene torch only
- No flux required
- For use with lawn equipment, sheet metal, tanks
10. 21 Sticks FAVORCOOL JCuPB 1/2 lb Phosphor Copper Brazing Alloy Welding Rods Self Fluxing No Need for Flux 0.050″ x 1/8″ x 14″ Industry Professional Grade Propane Gas Soldering Torch Supply BCuP-2
- A material with the binary alloy of copper- phosphors base.The temperature of the liquid phase is 1508°F. The temperature at which it melts from a solid to a liquid is 1508°F.
- Self-flux：that means the melting alloy fluid has a very good flowability, it will flow to every direction flat on the surface, and penetrate into deep shallow gap between the welding parts.
- Flux Free : you DON’T need any flux when using Phosphor-Copper alloy to brazing
- Magic material： when the percent of P in the alloy is over 6%, you will see a dramatical drop in the melting point of the alloy (around 200-300 C drop from pure copper)
- Specificity：the brazing alloys which contains P cannot be use to weld any iron or steel parts.
