Top 7 Best crosscut sled For 2022
1. KREG KMS7102 Table Saw Precision Miter Gauge System, Blue
- Factory Calibration. Guaranteed out of the box to .003 accuracy of 6-inches
- Gauge head is CNC machine perfectly square to the bar and table ( no stampings)
- Vernier scale allows fast, 1/10th-degree angle adjustments. Our extremely straight 24 inch (610mm) anodized-aluminum bar is 3/8 inch(9.5mm) thick by 3/4 inch(19mm) wide and features five bar adjusters that you can use to eliminate “play” in the miter slot with the turn of a screwdriver
- Microadjuster allows additional angle adjustment to 1/100th degree
- Positive stops at 0, 10, 22-1/2, 30 and 45-degrees; limited lifetime warranty
2. INCRA Miter Combo Value Pack
- Dock & Lock the included INCRA Miter Gauge in Seconds
- Removable t-slot retaining clips & adjustable miter bar
- GlideLOCK Miter Bar – The Miter 1000SE’s 6 expansion disks adjust both sides of the bar for ZERO side play, anti-friction travel on all table saws with standard miter gauge channels
- Special Edition Telescoping INCRA-LOCK Fence
- Special Edition 1/10th° Vernier Cursor
- Table size: For adequate support, the Miter Express requires a minimum of 11″ from the side of the blade to either the left or right edges of the saw (sled can be installed on either side of the blade).
3. Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop
- The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.
- The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
- The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
- Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
- Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.
4. Rockwell RW9266 BladeRunner X2 Cross Cut Sled
- Ideal for precise cross cutting applications
- Cutting groove for easy alignment
- Room to place your hands safely during your cuts
- Helps produce 90-degree cross cuts
5. Rockler Table Saw Small Parts Sled
- Sled base and fence provide zero-clearance support—just run it through your saw to locate the kerf
- Sled rides in miter track of your table saw—included miter slot stop limits forward travel of sled
- Rear-mounted blade guard is adjustable to fit most table saws
- Aluminum T-track on top edge of fence lets you add a flip stop (not included) for repeatable cuts
- Short T-track parallel to blade accepts an optional T-track hold-down clamp (sold separately)
6. Fulton DIY Table Saw Crosscut Sled Kit with 2 UHMW Bars 2 Aluminum Tracks 1 Knob and 1 Bolt along with Full Color HOW TO BUILD YOUR OWN Crosscut Sled Guide Booklet
- If you own a table saw, you probably have come across a situation or two where you need to make smaller cuts or make cross cuts. You may also have had the need to make repetitive cuts of the same length. Making small cuts, cross cuts and repetitive length cuts is where table saw crosscut sleds excel. Crosscut sleds help stabilize the work piece and are very accurate since they are essentially calibrated to your saw during the sled building process.
- Some time ago we noticed a lot of companies had UHMW bars available for purchase. While we as a woodworking company know exactly what they are used for, many novice or non-woodworkers do not. That’s when we decided to create this package with pre-cut UHMW bars, pre-cut aluminum track, a knob and bolt and an easy to understand how to guide booklet so you can create your very own, custom crosscut sled to fit your table saw!
- UHMW bars are most commonly used as runners for crosscut sleds since they don’t produce as much friction as wood does. Another advantage is that UHMW won’t expand or contract like wood does during drastic weather changes. Each bar is approximately 3/4” x 3/8” which fits most standard table saw slots. UHMW bars are also slick and won’t leave any residue, dust or shavings behind like wooden bars tend to do.
- The tracks that are included in this kit are made from solid extruded aluminum and are Made in the USA. Each track is cut to length for the perfect sub-fence on the crosscut sled. The included knob and bolt is for making a simple stop block which when finished, can slide the length of either track along the sub-fence. The stop block will allow you to make repetitive cuts without having to constantly move and measure the fence distance each time you make a cut.
- We have also included a full color and detailed how to guide book to help you with the crosscut sled building process. Each kit comes with 2 each 19” long by 3/4” by 3/8” UHMW bars, 2 each 12” long mini tracks, 1 each knob, 1 each 1/4” by 20 tpi bolt and a how to build your own crosscut sled guide book. Make your crosscut sled to the size you want or need for your table saw and your specific cutting needs. Please Note, the bars do NOT FIT RYOBI table saw track slots.
7. Tools & Jigs: The Efficient Small Shop
8. INCRA MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence
- Capitalizing on a great idea, the folks at Incra
- The sled with T-track and clamping fixture secures the work piece as one solid unit for precision cross-cutting at any angle
- The right-hand portion of the sled, once cut
- Table saw that blends incremental angle control and a special 3-panel sled
- Precision angle indexing teeth are laser cut in solid steel
- 364 lock solid angle stops in 1/2-degree increments
- Ten expansion disks adjust both sides of the bar for zero side play
- Hold down clamp locks your work piece onto the sled
9. Tablesaw CrossCut Sled
- Easy-to-read 1/2° graduations and a hair-line indicator ensure error-free setups
- Extra material allows you to cut the sled down to fit your saw perfectly
- Right edge of sled functions as a zero-clearance chip breaker
- Includes four 2′ pieces of 3/4″ wide self-adhesive low-friction tape for smooth sliding of the platform and fence
- Adjustable 90° stop
10. SawStop TSA-SA48 Sliding Crosscut Table Attachment
- This sliding table is built for versatility. Micro-adjust for detail cuts, and crosscut full sheets with the 55″ travel and 48″ crosscut capacity.
- The fence is at least 15% larger than typical crosscut sliders, spanning 43″ and extending past 58″.
- Adjust the table to fit your needs.
- Large flip-stops with scale and magnified lenses help ensure accurate, repeatable cuts every time.
