Top 7 Best feeler gauge for motorcycle For 2022
1. Stainless Steel Feeler Gauge Dual Marked Metric and Imperial Gap Measuring Tool (0.04-0.88 mm, 32 Blades)
- Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 32 blades thickness; Foldable feeler gauges, easy and convenient to take and store
- Easy identification: dual marked metric and imperial, 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm, the numbers of size are etched into feeler gauge for easy identification
- Metric sizes (mm): 0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88
- Inch sizes: 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035
- Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that
2. OEMTOOLS 25304 Gauge 12Bl Value Tap Feeler, Motorcycle Feeler Gauge Set, Spark Plug Feeler Gauge, Angled Feeler Gauge Set, Go and No Go Gauges, Valve Tappet Feeler Gauge
- SET INCLUDES: This feeler gauge set is composed of 12 heavy duty blades; Unlike other feelers, our set of blades is an offset feeler gauge set which is offset by 30 degrees; These blades are also 4 inches long so they are compact and easy to use
- WIDE RANGE: These go no go gauges have a wide range of measurements, so that you can be sure to get the correct calculation; Our automotive feeler gauge set measures from 0.008 inch (0.203 mm) to 0.26 inch (0.660 mm); Accurate feeler gauges
- MEASURES METRIC AND SAE: Our gap measurement tool is specially designed to not only display SAE measurements but also metric sizes; Each bent feeler gauge is laser etched with inches and millimeters, one right under the other, so they are easy to see
- DURABLE MATERIAL: No matter what materials you are working with, you do not have to worry about this tappet feeler gauge breaking while you work; Each of the 12 blades within this short feeler gauge set are composed of hardened and tempered steel
- EASY BLADE REMOVAL: This valve feeler gauge set features a thumb notch to loosen the hold, so that you can easily remove the size that you need; Then you can tighten the notch on this steel feeler gauge when the blades are back together
3. CAMWAY 2Pcs Feeler Gauge Set Stainless Steel Metric/Inch 32 Straight Blade Steel Feeler Gauge,16pcs Feeler Gauge and 45º Blades Offset for Measuring Gap Width/Thickness Measuring Tools
- 【Two Kinds of Feeler Gauge 】Feeler gauge set, straight feeler gauge with 32 pieces blades and 16-Piece blades offset valve bent feeler gauge.
- 【Metric and Imperial Dual Marked】Dual marked metric and imperial the specification of every blade was clearly marked on the surface with laser technology so that you could easy identification the Feeler and choose the suitable one conveniently.
- 【 360-degree Swivel Design 】The Feeler Gauge Set allows you to unfold or fold them easily and carry them with you. You could disassembled into a separate feeler gauge to use by adjusting the screw.Metal fastening screws,and durable.
- 【Anti-rust 65 Manganese Steel】There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, And Please don’t put on the humid environment.
- 【Use for】The feeler gauge is used to measure the gap size. When checking whether the measured size is qualified, you can use this method to judge, or the inspector can judge according to the tightness of the feeler gauge and the measured surface.It is mainly used for checking the gap value between two joint surfaces.
4. Spurtar 32 Blades Steel Feeler Gauge Measurement Tool for Measuring Gap Width or Thickness
- Easy identification- dual marked metric and imperial, 0.001inch to 0.04inch (0.03mm to 1mm), the numbers of size are etched into feeler gauge for easy identification
- User Friendly- The edge of the feeler gauge is steel and polished. It’s full of bright metal texture specially treated, smooth and doesn’t hurt your hand
- Foldable- Feeler gauges fold into a plated steel case with a thumbscrew, easy to carry, convenient to take and safe to store
- Tapered feeler gauge set is made of high quality flexible 65 manganese steel, hardened and polished for long time and accurate usage
- The Feeler Gauge is coated with vaseline. With this protection, the feeler gauge doesn’t get rusty and easy to open.
5. Tusk Tapered Feeler Gauge Set FG-02-032
- Tapered 32 blade feeler gauge set used to adjust valve clearances.
- Blades have a tapered tip for easier access to valve tappets and buckets in tight areas.
- Dual marked with metric (mm) and inch readings.
- Includes the following gauge sizes: 0.001″/0.03mm, .0015″/0.04mm, .002″/0.05mm, .0025″/0.06mm, .0028″/0.07mm, .003″/0.08mm, .0035″/0.09mm, .004″/0.10mm, .005″/0.13mm, .006″/0.15mm, .007″/0.18mm, .008″/0.20mm, .009″/0.23mm, .010″/0.25mm, .011″/0.28mm, .012″/0.30mm, .013″/0.33mm, .014″/0.35mm, .015″/0.38mm, .016″/0.40mm, .018″/0.45mm, .020″/0.50mm, .022″/0.55mm, .024″/0.60mm, .025″/0.63mm, .026″/0.65mm, .028″/0.70mm, .030″/0.75mm, .032″/0.80mm, .034″/0.85mm, .035″/0.90mm, and .040″/1.00mm.
6. Motion Pro 08-0055 Feeler Gauge
- Allows accurate tappet adjustments
- Angled blade for easy access to tappets
- Makes valve adjustments quick and easy
- Sold by card (6 pieces)
- Two of each sizes: 0.002 inches /0.003 inches , 0.004 inches /0.005 inches and 0.006 inches /0.008 inches
7. Brand New Points Adjusting Tool Feeler Gauge Compatible with BMW Boxer Airhead Motorcycles 12 11 1 353 640
- Model: BMW Boxer R Airhead Motorcycle Points Ignition Adjusting Tool
- Fits: BMW R100, R100T, R100RS, R100RT, R90/6, R90S, R80, R75, R60, R50
- Note: Not for use on points with bean can
- Part #: 12 11 1 353 640 Years: 1973-84
8. YUNSHUO Motorcycle Engine Valve Screw Adjusting Spanner Tool + Feeler Gauge
- Fit for: Most of Motorcycle and Scooters
- Please check size before buying
- The feeler Gauge in mm, comes with 17 blades and comes with 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.1 0.15 0.2 0.25 0.30 0.4 0.5 0.75 1mm
- What you get: 1x Square Hole Tool, 1x Hexagonal Hole Tool, 1x Feeler Gauge
9. ZUZUAN 1 Pack Feeler Gauge with 32-Blade and 1 Pack Offset Feeler Gauge with 16-Blade, Gauge Dual Marked Metric and Imperial Gap Measuring Tool
- ✔Feeler Gauge Sets: Including 65 manganese steel feeler with 32-blade and offset feeler gauge with 16-blade, made of 65 manganese steel, 65 manganese steel is more resistant to wear&tear and has higher strength than stainless steel, features high precision and hardness, good elasticity and wear resistance.
- ✔Easy Identification: Dual marked metric and imperial, the numbers of size with laser technology etched into feeler gauge and its specification is clear at a glance for easy identification.
- ✔Feeler Gauge with 32-Blade Measurement: 0.0015 inch to 0.035 inch(0.04 mm to 0.88 mm), please see the second picture for size details.
- ✔Offset Feeler Gauge with 16-Blade Measurement: 0.005 inch to 0.020 inch (0.127 mm to 0.508 mm), please see the third picture for size details.
- ✔Unique Design: The blades are bound within a chromed-blade protector to prevent loss of individual blades, designed with a thumb notch for easy selection and expansion, and it can be moved 360 degrees and disassembled if you want to use one alone.
10. Motion Pro 08-0052 .002 – .003 Feeler Gauge by Motion Pro
- Self-service display card with 6 individual feeler gauges
- Allows accurate tappet adjustments
- Angled blade for easy access to tappets
- Makes valve adjustments quick and easy